- For Toyota vehicles Aqua 10 series early, mid, and late models cruise control switch set with harness genuine type aftermarket product.

- Depending on the vehicle model and year, the meter may have a lamp that lights up when set, and it can be used without any change, just like the genuine part.
(The early model Aqua does not have the cruise control lamp lit)
*Product specifications* - Voltage: DC12V - Plug-on type [Set contents] - Cruise control switch main body x1 - Cruise control switch wire x1 - Wiring harness x1 - Mounting screws x2
"Compatible vehicle models" TOYOTA 10 series Aqua AQUA early, mid, late models Aqua NHP10 Year: December 2011 to present (Confirmed installation on R1 year Aqua S Style)
Installable grades Early models December 2011 to December 2013 G Black Leather, G, S, L Mid models December 2013 to December 2014 G, G’s, G Black Leather, G, S, L Late models December 2014 to October 2015 X-URBAN, S, L Late models with some modifications after November 2015 to May 2017 equipped with Safety Sense C X-URBAN, S, L Late models after some modifications from June 2017 to current Crossover S”Style Black” S, L
"Examples" - 2019 late model Aqua (December 2014 to November 2015) X-Urban can be installed as is - Aqua S August 2015 can be installed as is - R1 year Aqua S Style can be installed as is - Final late model from January 2021 can be installed as is
*Many Aqua grades only operate normally with the main switch installed, and may not function properly otherwise.
Differences depend on grade, manufacturer options, and year, so please purchase the additional harness (Aqua-specific) separately for 3,300 yen at your discretion.
*Differences depend on grade, manufacturer options, and year, so please purchase the additional harness (Aqua-specific) separately for 3,300 yen at your discretion.
*The cruise control operation lamp also lights up without issue, but in some vehicles where the lamp inside the meter is not installed, it may not light.
*The early model Aqua does not have the cruise control lamp lit.
A separately sold lamp is required.

*The early model Aqua's wiring from the spiral cable inside the steering column to the engine ECU does not seem to be standard wired, so installing on the early model requires purchasing a product with an ECU connection cable, not this product.
- Depending on grade, manufacturer options, and year, it may be possible to install directly on Aqua NHP10 series mid and later models (including late models of the 10 series), but for early models, since the wiring from the spiral cable inside the steering column to the engine ECU is not standard, if you want to install on an early model, you need to purchase a cable for ECU connection, not this product.
(Wiring work to the passenger side footwell ECU is required)
"Product description" - Because of its finish almost indistinguishable from genuine, it allows one-click operation for set, accelerate, decelerate, and cancel, with brake reset.
- Especially recommended for those who frequently use highways during travel, as having cruise control makes a significant difference.

In some vehicle models, additional wiring may be required.
82998-12750 82998-12870 Both can be ordered at the dealer.
(Each 400 yen) "Note" - Even for models outside the above grades, installation may be possible with an additional harness.
*Depending on the vehicle's specifications, year, options, and grade, the cruise control lamp inside the meter may also light up in sync.
*This product's lever is somewhat stiffer than the genuine. It is not a radar automatic cruise.
*In some vehicles, the cruise control may not operate properly.
*Since steering damage or airbag malfunction may occur, installation DIY is at your own risk.

2026/05/27 15:33:29#094212e0240aae12dbac42b8b70e9699aba740e5