When modifying the carburetor or increasing the displacement of an Ape 100, reviewing the intake path is an important point.

If the genuine configuration is used as is, the performance of a large-diameter carburetor cannot be fully utilized, which may affect the setting range and intake efficiency.

This product is an intake manifold for intake system customization, assuming the introduction of big carburetors such as PC20, PD22, and PE24.

With a design featuring a 24mm port diameter on the engine side and a 26.5mm port diameter on the carburetor side, it supports increased intake capacity.

It can be used as a component adjustment part when modifying bore-up vehicles or changing intake specifications.

The mounting pitch is 48mm for all, and it is intended for installation on vehicles that meet the compatibility conditions.

This configuration is suitable not only for changing from the genuine carburetor but also for situations where you want to review the response characteristics and intake balance in the mid-to-high RPM range.

It supports setting applications that assume multiple tuning steps such as carburetor replacement, fuel adjustment, and intake/exhaust customization.

This is a practical intake manifold part for users who want to redesign the intake system configuration of their Ape 100, not just for repair purposes.

Q. What kind of applications is this intake manifold for?
A. This is an intake manifold for reviewing the intake path when changing to large-diameter carburetors such as PC20, PD22, and PE24 on an Ape 100.

It supports intake system customization applications that assume configuration changes during bore-up vehicles or intake/exhaust tuning.

Q. Can it be used on vehicles with genuine carburetors?
A. This product is designed assuming the introduction of big carburetors, so it is not intended for genuine carburetors but for configurations that involve changing to large-diameter carburetors and fuel adjustment settings.

It is used to ensure flow rate and adjust intake efficiency when changing intake specifications.

Q. What are the important points for size confirmation?
A. The mounting pitch is 48mm on both the engine side and the carburetor side, with port diameters of 24mm on the engine side and 26.5mm on the carburetor side.

When confirming compatibility, it is necessary to check not only the vehicle model name but also the carburetor side dimensions and mounting conditions.

Q. What kind of custom vehicles is it suitable for?
A. It is suitable for bore-up vehicles that involve displacement changes and vehicles that undergo total setting including intake and exhaust systems.

It can be used as a component part when you want to review the response characteristics and intake balance in the mid-to-high RPM range.

Q. Who is this part suitable for?
A. This part is for users who want to perform intake system customization beyond the genuine state, and for those who proceed with settings assuming carburetor replacement and fuel adjustment.

It can be used not only for repair purposes but also for installation aimed at configuration changes.

"Notes"
*Please be sure to confirm the compatible vehicle models before purchasing.

*Depending on the vehicle model, processing or adjustments may be required.

*Instruction manuals for handling and installation are not included.

*Installation may require specialized knowledge and skills, so please consult with a professional shop at your own discretion.

*For accident prevention, we strongly recommend having the work done at a shop with qualified personnel.

*We recommend purchasing for those with specialized knowledge.

*We are not responsible for any accidents during work, installation errors, or damage after installation.

*If you are requesting work from a shop, please confirm the product details with the person in charge in advance.

*As this is an imported product, please be aware that there may be minor scratches or dirt from the import process.

*Please confirm the size and installation location, and we recommend installation by a professional if necessary.

"Designed for Big Carburetors": This is an intake manifold for Ape 100 intake system customization.
It assumes the installation of large-diameter carburetors such as PC20, PD22, and PE24, and supports review of the intake path and configuration changes.

"Compatible with Bore-Up Vehicles": Features a 24mm port diameter on the engine side and a 26.5mm port diameter on the carburetor side.
It supports increased intake capacity during displacement upgrades and intake/exhaust tuning, expanding the range of setting configurations.

"48mm Mounting Pitch Specification": Designed with a 48mm mounting pitch on both the engine side and the carburetor side.
When confirming compatibility, please check the carburetor dimensions and mounting conditions in advance, not just the vehicle model name.

"Also Ideal for Setting Applications": Supports intake system tuning that assumes carburetor replacement and fuel adjustment.
This is a custom part for users who want to review the intake balance and configuration in the mid-to-high RPM range.

"Compatible with Both Customization and Repairs": Can be used not only for specification changes from the genuine state but also for redesigning the intake system configuration and for repair purposes.
This is a practical part for setting vehicles that utilize specialized knowledge.

2026/09/16 17:06:35#e73918746974df8cedaa6ec1d634bc232d1e5044