Code: 4549292230239

Brand: Canon

About this product
Compatible cameras: Cameras equipped with a multi-accessory shoe on the EOS R system. Not compatible with cameras equipped with an old accessory shoe, such as EOS R5, EOS R6, EOS R, EOS RP, EOS-1D X Mark III, EOS 5D Mark IV. To operate the FE memory function via camera control buttons, a firmware update on the camera is required.
› See more Brand: Canon
Supported mount: Hot shoe mount
Camera flash hot shoe
Flash sync speed: 1/250 second
Included components: case, mini stand, battery pack, mounting leg cover. About this product
Compatible cameras: Cameras equipped with a multi-accessory shoe on the EOS R system. Not compatible with cameras equipped with an old accessory shoe, such as EOS R5, EOS R6, EOS R, EOS RP, EOS-1D X Mark III, EOS 5D Mark IV. To operate the FE memory function via camera control buttons, a firmware update on the camera is required.
› See more

Shipping size: Height 8, Width 8, Depth 18

Shipping weight: 500

The Speedlite EL-10 can brightly and beautifully illuminate subjects even at a distance, with a guide number of approximately 40. It can shoot with a large amount of light, making it suitable for full-body shots and group photos where built-in flash is insufficient, reaching distant subjects and illuminating them brightly and clearly. 1 ISO 100, 105mm irradiation angle. 2 In the case of EOS R10. 3 Wide bounce capability in three directions: upward 90°, left 150°, right 180°, allowing light to be bounced in the necessary direction regardless of the position of the camera and reflector surface. Versatile use of standard AA batteries allows for quick continuous shooting. Improvements such as increased heat dissipation through an enlarged heat sink, optimization of continuous flash count according to zoom position, and flash limiting based on charging time have increased the number of continuous full flashes compared to the Speedlite 430EX III-RT. This allows for comfortable, rapid shooting of scenes requiring continuous flashes. The battery uses common AA batteries, making it easy to obtain and providing peace of mind in case of battery depletion. Compatible camera: Cameras with a multi-accessory shoe on the EOS R system. Firmware update on the camera is required to use the FE memory function via camera control buttons. Specifications Model: Clip-on type E-TTL II / E-TTL automatic flash Guide number (approximate): 40 (at 105mm setting, ISO 100 m) Irradiation angle: Corresponds to shooting angles of 24-105mm lens (14mm with wide panel) Automatic setting (auto adjusts irradiation angle based on shooting angle and screen size) Manual setting Bounce: Upward 90°, left 150°, right 180°; downward not possible Exposure control method: E-TTL II / E-TTL automatic flash, manual flash, custom flash, group flash mode Flash coverage range: (using 50mm F1.4 lens at ISO 100) Normal flash: approximately 0.7 to 22.1m Quick flash: approximately 0.7 to 12.9m High-speed sync: approximately 0.7m to 10.1m (at 1/250 second) Flash exposure compensation: 1/3 or 1/2 stop steps, 3 steps, following the flash exposure setting steps. High-speed sync: supported Manual flash: 1/1 to 1/1024 flash output; up to 1/128 during high-speed sync Modeling flash: not supported. When used as a clip-on, multi-flash: not supported. Flash recycling time (charge time): Normal flash: approximately 0.1 to 1.5 seconds; quick flash: approximately 0.1 to 1.3 seconds; number of flashes: approximately 210 to 1400 times, based on manufacturer testing standards. Wireless flash communication: not supported Power supply: 4 AA alkaline or nickel-metal hydride batteries (not compatible with other AA batteries) Flash cycle count: approximately 210 to 1400 times, based on manufacturer testing standards. Dimensions: approximately 70.6 (W) x 116.3 (H) x 98.3 (D) mm Weight: approximately 287g (only the flash unit) Included accessories: flash case, mini stand, mounting leg cover