Fits a wide range of main brand tool holders and waist pouches.

You can freely combine the separately sold custom chain with other company chains to build your ideal waist tool setup.

Product images showcase various items such as Knicks (KNICKS) waist pouches/chains, WORKERZ HIGH tool holders, and WORKERS LABEL small pouches.

The belt width supports up to 53mm.

Ideal for standard 50mm belts.

"Luxurious machining achieves both lightweight and high strength"
The seamless body, machined from an aluminum alloy block, realizes a rigidity with a breaking load of over 1.7 tons＊.

Achieves approximately 36% weight reduction compared to stainless steel plates of the same size, significantly reducing the burden on the waist during long hours of work.

"Available in beautiful colors [7 colors in total]"
After fine polishing with sandblasting, vivid coloring is achieved through anodizing treatment.

The glossy matte colors stand out from any angle at 360°, increasing attention on site and during video shoots.

"Corrosion resistance that withstands heavy use"
Corrosion tests conducted by public agencies confirmed zero rust even under conditions where inexpensive compatible products would become white rust and deteriorate.

You can use it with confidence even in harsh environments with rain, sweat, and dust.

"Expandable with stacking"
Compatible with detachable items such as Tajima's "Sec Holder"＊ that can be stacked on the plate.

・Long size ＞ Recommended for the standard size Sec Holder
・Normal size ＞ Recommended for the slim size Sec Holder
Please pay attention to the size combination.
Please be careful with size matching.

"Domestic planning x Three-stage inspection"
Planned and supervised by a Japanese company, with double checks by third parties and our own staff even after overseas manufacturing.

Microscopic inspection of parts during sampling ensures delivery of quality that satisfies professional users in Japan.


＊Test results are representative values based on new samples and are not guaranteed values.

＊"Sec Holder" is a registered trademark of TJM Design Co., Ltd., and there is no partnership.

＊The trademarks and product images of other companies listed on this page are solely for compatibility explanation and do not intend to infringe on intellectual property rights.

"Versatility that transcends manufacturer boundaries" Widely compatible with main brand tool holders and waist pouches.
By combining with separately sold custom chains or chains from other manufacturers, you can assemble your own ideal waist tool setup.
For example, images show combinations with Knicks (KNICKS) waist pouches and chains, WORKERZ HIGH tool holders, and WORKERS LABEL small pouches, so please take a look.
Supports belt widths up to 53mm.
Ideal for standard 50mm belts.

"Luxurious machining achieves both lightweight and high strength" Machined from a single aluminum alloy block.
The smooth, seamless curves realize an extraordinary high strength with a breaking load exceeding 1.7 tons.
Weight is approximately 36% lighter than stainless steel plates of the same size.
Dramatically reduces the burden on your body during work.

"Available in beautiful colors [7 colors in total]" Fine coloring achieved through sandblasting and anodizing, creating a beautiful appearance from any angle at 360°.
All 7 colors will add color to your waist tools.

"Corrosion resistance that withstands heavy use" Corrosion tests simulating harsh environments confirmed zero rust even under conditions where inexpensive compatible products would rust.
Proven corrosion resistance suitable for tough work sites.
(*JIS H 8681-2 "CASS test")
"Expandable with stacking" The Tajima "Sec Holder＊" and other detachable items can be stacked on the plate.
Using detachable items greatly enhances the convenience of waist tools.
＊The "Long size" plate can be stacked with the standard size "Sec Holder".
＊The "Normal size" plate can be stacked with the slim size "Sec Holder".
Please be careful with size mismatches.
This is unrelated to TJM Design Co., Ltd., which develops the "Tajima" brand.
）
"Domestic planning x Three-stage inspection" Under the supervision of a Japanese company, with strict checks by third-party organizations and our own staff even after overseas manufacturing.
Inspection includes microscopic examination of parts to check for abnormalities.
Ensuring high quality that meets the demands of professional users in Japan.

The trademarks, product images, etc., of other companies listed on this product page are intended to show product compatibility and do not infringe on intellectual property rights such as trademarks or design rights.
This does not imply any partnership or approval relationship with those companies.
Please note that the test data and results are representative values measured from new products as samples and are not guaranteed values.

2026/01/05 19:34:27#5fd9a55dab898aa220313bad50676a96451f0779