Caution (Disclaimer) > Please be sure to read "Precautions". We are not responsible for any accidents or damages resulting from the use of this product.
Please understand in advance.
The instruction manual and warranty card are not included.



The step difference is eliminated, and the joint is cut in an S-shape.
Because there is no step difference, the polishing object does not jump or dance.
The improved S-shaped joint has a wider adhesive surface, making it less likely to break and more durable.

This endless belt has a circumference of 910mm, a width of 100mm, and is designed to be more resistant to breaking and to produce a smoother finish, with durability increased by 120% compared to conventional products.
A set of 10 pieces for more convenient use.
The polishing object does not dance at the joint.
This is a limited special order universal replacement belt set of 10 pieces for belt sanders, with nearly flat joints.
In conventional products, a step inevitably occurs at the joint, and when the polishing object reaches that area, it jumps up and dances.
This product has solved such problems for everyone.
First, the adhesive surface of the joint was placed on the back side.
Then, the cut surface was improved to an S-shaped wave pattern.
By doing so, the abrasive surface becomes almost flat, and the effect of the S-shaped cut surface widens the adhesive area of the joint, increasing tension durability and making it less likely to break.
The product features a cloth base that is resistant to tearing, but inevitably has more fraying of the threads on the sides, so the frayed threads on the sides are carefully removed to improve appearance.
Please understand that the width is slightly narrower than 100mm.
Since it is a set of 10 pieces, you can use and discard them freely and vigorously for polishing.
We have nine types ranging from coarse #80 to fine #800, so please make use of them.


Endless belt that allows you to work without feeling stress at the joint.
For better grinding and a more beautiful finish.
We have prepared from #80 to #800 to enable step-by-step work.


The challenge was to align the S-shaped cut surface neatly.
Although there were many difficulties in developing a durable, less likely to break, seamless, specially ordered endless belt that can be finished more beautifully while keeping the cost close to conventional products, it has finally been put into practical use after thorough testing.


We support your work with a rich lineup.
The special S-shaped joint endless belt is available from #80 to #600.
Please note that #800 has a straight joint.


Images of the abrasive surface for all nine types from #80 to #800.
To better illustrate the grain roughness, close-up images of all nine types of abrasive surfaces are provided.
Please refer to them.


Can be used for a wide range of applications from rust removal on metal to woodworking and leather processing.


Suitable for rust removal on metal and leather processing.
Not only for woodworking, but also for metal processing, rust removal, leather processing, and stone processing, with almost no step difference at joints, allowing stress-free and clean processing.


Stress-free, professional-grade finish.


Can be used in various scenes.

"Precautions" We are not responsible for any accidents or damages resulting from the use of this product.
Please understand in advance.
The instruction manual and warranty card are not included.
Depending on the lot, there may be rare cases where the product management number is printed in small characters.
Only the outermost one of the 10-piece set has the abrasive surface facing inward to prevent package damage due to friction with the abrasive surface.
Please understand in advance.

The polishing object does not dance at the joint.
This is a set of 10 universal replacement belts for belt sanders, with nearly flat joints, specially ordered and limited.
Because it is cloth-based, the frayed threads on the sides are carefully removed before delivery, so please understand that the width is slightly narrower than 100mm.
Since it is a set of 10 pieces, you can use and discard them freely and vigorously for polishing.

Please set and use with a commercially available belt sander.
Less clogging and durable due to the cloth base of the belt.
Capable of wide-ranging polishing, suitable for various scenes.
Woodworking/processing, stone polishing/processing, metal polishing/processing, rust removal, and paint stripping.
Please use for other metal, resin, and polishing work.
Please use with a 100mm compatible belt sander.

We have a range from #80 to #800.
Can be used in stages from rough grinding to finishing.
Please make use of it.

Size (approx.): 100mm x 915mm, Material: AA (Alumina), Grain size: 100. * Slight variations in width and circumference that do not affect work may occur.

From late September 2017, the product with no joint step difference has been available.
Furthermore, the joints are cut in a wave pattern, increasing durability.
Specifications and design may vary slightly depending on the time of arrival and lot.
Please understand in advance.
Due to display and environment, there may be slight differences in color and appearance.
Thank you for your understanding.

2025/12/01 17:58:12#722663f2b445039f7493b32fea29d53c7b8b75e4