Please read carefully (disclaimer) > Important notes: We are not responsible for any accidents or damages resulting from the use of this product.
Please understand in advance.
The product does not come with an instruction manual or warranty card.



The joint has no step, with an S-shaped cut.
Because there is no step, the object being polished does not jump or dance.
The improved S-shaped joint has a wider adhesive area, making it less likely to break and more durable.

This endless belt has a circumference of 910mm, a width of 100mm, and is designed to be more resistant to breaking and to produce a smoother finish, with durability increased by 120% compared to conventional products.
It comes in a set of 10 sheets for more convenient use.
The object being polished does not dance at the joint.
This is a set of 10 universal replacement belts for belt sanders, specially made with a limited, flat joint for a seamless finish.
In conventional products, a step inevitably forms at the joint, causing the object being polished to jump or dance when it reaches that point.
This product has solved that problem.
First, the adhesive surface of the joint was placed on the back side.
Then, the cut surface was improved to an S-shaped wave pattern.
This makes the abrasive surface almost flat, and the S-shaped cut surface increases the adhesive area at the joint, enhancing tension durability and making it less likely to break.
The product features a cloth base that is resistant to tearing, but fraying threads are unavoidable and tend to appear on the sides. To improve appearance, frayed threads on the sides are carefully removed before delivery.
Therefore, please understand that the width is slightly narrower than 100mm.
Since it is a set of 10 sheets, you can use them freely and discard after use without hesitation.
We offer nine types ranging from coarse #80 to fine #800, so please make use of them.


Endless belt that allows you to work without feeling stress at the joint.
For better grinding and a more beautiful finish.
We have a range from #80 to #800 to enable step-by-step work.


The challenge was to align the S-shaped cut surface neatly.
Although developing a seamless, durable, and less breakable endless belt that can produce a cleaner finish at a cost comparable to conventional products involved many difficulties, thorough testing was conducted, and it was finally put into practical use.


We support your work with a rich lineup.
The special S-shaped joint endless belt is available from #80 to #600.
Please note that #800 has a straight joint.


Images of the abrasive surface for all nine types from #80 to #800.
To better illustrate the grain size, close-up images of all nine abrasive surfaces are provided.
Please refer to these images.


Can be used for a wide range of applications from rust removal on metal to woodworking and leather processing.


Suitable for rust removal on metal and leather processing.
Not only for woodworking but also for metal processing, rust removal, leather processing, and stone processing, with virtually no step at the joint, allowing for stress-free and clean processing.


Stress-free, professional-quality finish.


Can be used in various scenes.

Important notes: We are not responsible for any accidents or damages resulting from the use of this product.
Please understand in advance.
The product does not come with an instruction manual or warranty card.
In rare cases, the product management number may be printed in small characters depending on the lot.
Only the outermost sheet of the 10-sheet set has the abrasive surface on the inside to prevent package damage due to friction with the abrasive surface.
Please understand in advance.

The object being polished does not dance at the joint.
This is a set of 10 universal replacement belts for belt sanders, specially made with a limited, flat joint for a seamless finish.
Because it is cloth-based, the side threads are carefully removed to improve appearance, so the width is slightly narrower than 100mm.
Since it is a set of 10 sheets, you can use them freely and discard after use without hesitation.

Please set and use with a commercially available belt sander.
Less clogging and durable due to the cloth base of the belt.
Capable of wide-ranging polishing, suitable for various scenes.
For wood polishing/processing, stone polishing/processing, metal polishing/processing, rust removal, and paint stripping.
Please use for other metal, resin, and similar processing/ polishing tasks.
Please use with a belt sander compatible with 100mm.

We offer from #80 to #800.
Can be used in stages from rough grinding to finishing.
Please make use of it.

Size (approx.): 100mm x 915mm, Material: AA (Alumina), Grain size: 120. Note: Slight variations in width and circumference that do not affect work may occur.

Since late September 2017, the product has been made without joint steps.
Furthermore, the joints are cut in a wave pattern, increasing durability.
Specifications and design may vary slightly depending on the time of arrival and lot.
Please understand in advance.
Due to display environment and other factors, there may be slight differences in color and appearance.
Thank you for your understanding.

2025/12/01 17:39:45#24b7d239914b2d9e1f27836352c51fea1fbfdf0f