Recommended for those who are installing a new modem in an office, adjusting the placement of Wi-Fi routers or home gateways (HGW), moving, have cut the cables currently in use, or are purchasing as extension cables when changing room layouts, and have received many satisfied voices.
Even customers who urgently need a cable now but have searched at electronics stores and found none, and contacted the contracted manufacturer which takes several days and costs several times more, have also expressed satisfaction.

Product description: Compatible with genuine cables from various companies, with almost no difference in line speed.
I tested the speed of the optical line using a speed test site, and there was no significant performance degradation.
Customers who purchased have also said that it performs the same as NTT's genuine product.
(Differences may occasionally be observed depending on your environment.
Thank you for your understanding.
)
Installation method: The mechanism for attaching this optical cable terminal is as follows: 1. Remove the protective caps at both ends, 2. Align the blue plastic protrusion and insert until it clicks, 3. Hold the cable protection part protruding from the same plastic and push further until it clicks into place.
Features of this product: Unlike NTT's genuine shutter-type connectors, the connection part is simple, and since you only need to remove the protective cap at the tip of the connector, installation is not very troublesome.
Customers considering connecting it to their current product can understand by carefully examining the connector part of their existing cable.
Cable attachment and detachment are very easy, so anyone can use it with confidence.
When in use, the connection part has a cap, so please remove it before use.
Flexible and firm cable, safe to use.
Because it is easy to bend, even if you bend the cable to fit the installation position, it will not affect the line speed.

Supported devices: This cable is used with NTT, optical outlets, Docomo, Docomo Hikari, SoftBank, au, NURO Hikari, etc., and is compatible with all manufacturers.
Please use with confidence.
Router NTT compatible models: PR-500, RS-500, PR-400, PR-A300, PR-S300, PR-S300SE, etc.
Product details: An optical cable with SC connectors on both sides.
Ideal for exposed wiring.
Cable outer diameter: 2.8mm, Connector color: Blue, Connector type: SC, Polished surface: SPC, Pressure-resistant specifications.
Can be used in places where pressure may be applied to the cable.
Specifications: SM (Single Mode) 9/125, SC connector, polished surface: SPC, cable outer diameter: 3mm, wavelength: 1310/1550nm, pressure-resistant, flame-retardant specifications.
2026/06/05 11:08:36#0e04e6f0016dffe28a04273f27e9a2d4343d0641