Do you have trouble finding a place for your wine glasses in your kitchen shelves or cupboards?
This wine glass holder is an item that makes it easy to hang stemmed glasses using the space under the shelf.
You can neatly organize glasses that are difficult to place by making them a visible storage item.

It is fixed with screws by sandwiching it to the shelf board, so it can be installed without drilling holes in the shelf.
The fixing position can be easily adjusted to match the thickness of the shelf board, and the compatible shelf board thickness is approximately 1cm to 4.5cm.

The opening of the rail is approximately 3.5cm, making it easy to insert stemmed glasses.
It can be used to store glasses with compatible leg widths, such as Bordeaux glasses, white wine glasses, and cocktail glasses.
The number of glasses that can be hung and how easily they can be arranged will vary depending on the leg width and bowl shape of the glasses.
For larger glasses and champagne flutes, we recommend hanging them with plenty of space.

Size ・3 lanes: approx. 30 x 22.4cm ・4 lanes: approx. 44.8 x 22.4cm ・Height of the part extending below the shelf: approx. 6cm ・Product weight: 3 lanes approx. 540g / 4 lanes approx. 670g ・Compatible shelf board thickness: approx. 1cm to 4.5cm ・Rail opening: approx. 3.5cm
Variations ・Number of lanes: 3 lanes / 4 lanes ・Color: White / Black / Matte Gold
Matte gold has a subdued color tone with suppressed gloss.
It may give a different impression than bright gold or glossy gold.
The appearance of the color may vary depending on the installation location and lighting environment.

Caution: Please check not only the thickness of the shelf board but also the gap when closing the door.
For shelves with doors, a gap of 3mm or more is required between the door and the shelf board.
The downward protrusion and appearance after installation will vary depending on the thickness of the shelf board and the fixing position.

The depth is approximately 22.4cm.
When hanging multiple large or tall glasses, please check the installation space and the spacing between glasses before use.

Depending on the material and shape of the shelf board, there may be a slight gap or wobbling between the fixing part and the shelf.
In that case, please use commercially available thin cushioning material or gap tape according to the installation surface.
Cushioning material and gap tape are not included.

When installing, do not overtighten the screws all at once; tighten them little by little while checking the left and right fixing positions.
Overtightening may cause damage to the screw threads or the fixing part.
Please check the fixed state before use, and do not use if there is any wobbling.