Usually ships within 1-5 business days [New, unopened item]

Gear ratio, bearing size does not change between left and right. (Bearing shape/images are subject to change without notice.) Oil-free use and oil-in use will change bearing noise, casting distance, etc. depending on viscosity. ◎Notes Bearings have individual differences (although there may be differences in individual bearings, there are no problems after installing them on the reel.) Also, if you transplant the purchased bearings to a different reel model, the rotation and bearing noise will change. Bearing Description ◎Stainless steel bearings with shield grease, ABEC11 specification smooth bearings. ◎HX Ceramic Bearings Open (oil-free at time of sale) Ideal for starting with ceramic bearings. The open type makes maintenance easy (ABEC11 specification). ◎GX Ceramic Bearings GX Shield type (some open) (oil-free at time of sale) These are rare shield bearings for ceramic bearings. As they are shield bearings, dust and foreign matter are less likely to enter. (ABEC11 specification) ◎Zirconia Ceramic Bearings (no oil at time of sale) Aren't these absolutely necessary for saltwater use? The biggest advantage is that they do not rust. Outer ring ceramic, inner ring ceramic, ball ceramic, special material used for the retainer to minimize bearing noise. ◎Type S Ceramic Bearings (no oil at time of sale) HX-TYPES With the special retainer unique to Type S, both oil-less and oil-in use offer excellent smoothness and low noise. (ABEC11 specification) ◎Ceramic Bearings HXR (oil-free at time of sale) With a special retainer, they are excellent in durability, casting distance, high rotation, and low noise. Of course, they can be used oil-less or oil-in. (ABEC11 specification) ◎Ceramic Bearings LX (oil-free at time of sale) This is a comparison with Ceramic Bearings HXR. While maintaining the durability, casting distance, and high rotation of HXR, the retainer shape of Type S has been changed for ultra-low noise. (ABEC11 specification) ◎Twin Bearings (Double Ball Bearings) are made by utilizing the characteristics of various bearings, resulting in improved initial speed. They enable casting of lighter lures than normal bearings. Installation: Normally, the bearing thickness is 4mm, but twin bearings are 3mm thick, so a ring is used to increase the thickness by 1mm. Installation is easy. When installing on the parming cup side and cast control, place a large O-ring between the reel body and the bearing. For models where the spool has bearings, use a small O-ring. Normally, the bearing thickness is 4mm, but twin bearings are 3mm thick, so an O-ring is used to increase the thickness by 1mm. To install, place an O-ring on the spool shaft and insert the bearing with the balls facing you. ◎Bearing comparisons can be confirmed in the bearing table. (These are not measured values; they are conceptual diagrams.) ●For saltwater use, we recommend using oil to prevent rust etc.
For Abu Garcia ABU 1500C IAR spool, ceramic bearings HXR 2 pieces (11-5-4 & 11-5-4) 1. Bearing size: Outer diameter 11mm, Inner diameter 5mm, Thickness 4mm 2. Bearing size: Outer diameter 11mm, Inner diameter 5mm, Thickness 4mm Can be used oil-less or oil-in for versatile use.