Pot Anti-Tip Stopper for Small Pots*For 5-8号 pots (width 15cm - 24cm / height 21cm)
About the Pot Anti-Tip StopperHave your potted plants been damaged by typhoons or sudden wind and rain, ruining the flowers that bloomed beautifully or the plants that were growing well?
As plants and vegetables like tomatoes, olives, roses, and morning glories grow, their balance with the pot becomes unstable, increasing the risk of them falling over in the wind. For ceramic pots, your precious pot might even break.
Using the Pot Anti-Tip Stopper increases the stability of your pot, so you don't have to worry about your plants being ruined or your pot breaking. The stopper is made of strong AES resin and is securely fastened to the pot with a magic band, ensuring reliable prevention of tipping.
You'll also be pleased to know that you won't have to move heavy potted plants indoors every time a typhoon approaches.
Supports Pots from 15cm to 36cmThe Pot Anti-Tip Stopper is available in two sizes: for small pots (diameter 15-24cm) and for large pots (diameter 27-36cm).
It supports 5 to 12号 flower pots, which are commonly used in home gardens and on balconies, so you can replace the flower pots where you install the Pot Anti-Tip Stopper.
How to Install the Pot Anti-Tip Stopper1. Place the four anti-tip stoppers at the bottom of the pot so they form right angles, spaced evenly. (Figure 1)2. Thread the fixing band through the long hole at the bottom of one anti-tip stopper. Then, thread the fixing band through the long hole at the bottom of the next anti-tip stopper, and continue threading it through the long holes of the remaining anti-tip stoppers sequentially. (Figure 2)3. Firmly press one end of the fixing band against the inner wall of the pot with your finger. While pulling the band to ensure each anti-tip stopper is in close contact with the pot's wall, overlap the band and secure it. Cut off any excess fixing band with scissors.4. Thread the remaining fixing band through the long hole at the top of the anti-tip stoppers and attach it using the same procedure.5. Once you have confirmed that each anti-tip stopper is securely and evenly attached to the pot at a right angle, the installation is complete. (Figure 3)
PrecautionsThe Pot Anti-Tip Stopper prevents pots from tipping over when securely fastened to the flower pot. Please check if it can be attached to your home's pots before purchasing.
*Please note that we cannot accept returns due to inability to install after purchase.
*The size of pots of the same 号 number may vary slightly depending on the manufacturer. For pots larger than the indicated size, we recommend the L size.
*Cannot be used with saucers attached.
How to Check1. Download the actual size template of the Pot Anti-Tip Stopper and print it on A4 paper.
You can download the image from the following link:https://file003.shop-pro.jp/PA01095/110/image/tentou-202207.pdf
2. Cut out the template with scissors.
3. Hold the template against the pot you wish to install it on to check if it can be attached.
Two Points to Check for InstallabilityPoint 1.Can the part that inserts into the bottom of the pot be inserted more than halfway?
Point 2.Does the upper belt hole fit snugly against the pot without any gaps?
There may be an error of about 1cm between the template and the actual product.For pots with a rim design, please check if there is enough clearance to install it.
Specifications for Small Pots (Supports 5-8号 Pots)Product Number: HTS-001SSet Contents: 4 anti-tip stoppers, 1 fixing band (205cm)Material: AES resin (main body), Polyester (fixing band)Main Body Size: Width 2cm (maximum) x Length 16cm x Height 10.5cm*Size per unitCompatible Size: 5-8号 pots (width 15cm - 24cm / height 21cm)