- Magnetic and very convenient. This is a 9-LED battery-powered warning light.
It has a very noticeable brightness and is sure to help prevent accidents.
It uses AAA batteries (AA), so replacement is easy. Even if the batteries run out, they are easy to obtain.

- The main body material is polycarbonate, and the exterior is polyvinylidene chloride.
There are 9 light patterns: fast rotation/fast flashing/slow flashing/slow rotation/intermittent flashing, bright all-on/dim all-on/4-LED on/4-LED on/3 white LEDs on.
If you see someone using it or wearing it, you'll want one.
- Attach to corner properties to prevent collisions.
As a safety light in road construction.
It can be attached to bicycles and motorcycles to increase visibility during night riding, used as an emergency signal light, or as a display light or patrol lamp.
The light is very bright, so it can also be used as lighting for traffic safety measures during night walks.
Equipped with waterproof performance, ensuring safe use even in rain.

- Many rotating lights have been available that use conventional halogen lamps.
While their performance was satisfactory, they required large-scale equipment such as generators or AC power sources as external power, and complex wiring, making them difficult to use casually.
However, this warning light can be used casually with dry batteries, so it can be used without worrying about the installation location.
The lighting uses LEDs, so it can operate for a long time with just AAA batteries.
Spare power sources are also easy to secure.

- With many dangerous accidents occurring, it is more important than ever to protect yourself.
This product can be easily used for crime prevention and for ensuring safe work at construction sites.


"Light Patterns": 9 patterns: fast rotation/fast flashing/slow flashing/slow rotation/intermittent flashing, bright all-on/dim all-on/4-LED on/4-LED on/3 white LEDs on
"Luminance": 12,000mcd
"Number of LEDs": 15
"Size": Diameter 10cm x Thickness 3.5cm
"Weight": 192g
"Materials": PC (Polycarbonate), TRP (Polyvinylidene chloride)
"Batteries": 3 AAA batteries (not included).
)
"Voltage": 12 (V) "Power": 1.5 (W)
"Waterproof Standard": IP66
"How to switch modes": Pressing the button first turns on the power, and each subsequent press changes the light pattern.

After cycling through all 9 light patterns, pressing the button a 10th time will turn off the power.


*Due to the waterproof design, the lid is sealed tightly. If it is difficult to open by hand, use a screwdriver to remove it.
Step 1 Loosen the screw by turning it counter-clockwise with a Phillips head screwdriver and remove it.
Step 2 Insert a precision flathead screwdriver into the two claws as far as it will go.
Step 3 Use the principle of leverage to push upwards.
Step 4 Once removed, insert 3 AAA batteries, paying attention to the orientation, and press the switch button to confirm operation.
Once operation is confirmed, replace the lid and use the product.


*The product will be delivered in red product packaging.
We appreciate your understanding.

2026/08/04 23:09:10#f558368641ef386b2c6d448819a7d992d47a2a9c