*Regarding the provision
To wrap large sizes such as the hood, a large wrapping sheet is required, but there are few large sizes available on the market, and even when available (including domestic well-known manufacturers), they tend to be expensive.
Compared to painting, we want to offer products that allow you to easily enjoy patterns and colors at a reasonable price, so we have started handling mainly large-sized wrapping sheets.

Typically, OEM and custom-designed products incur high costs due to equipment expenses, labor costs, transportation costs, and intermediate margins to maintain quality, making it difficult to offer cost-effective options.
By contracting directly with factories, we can significantly reduce intermediate margins and shipping costs, making it possible to offer large sizes, which are usually expensive, at a low price.

Our products do not reach the level of wrapping sheets provided by well-known domestic manufacturers, but if you look at the cost performance, especially for large sizes, we believe you will be satisfied with our products.
Additionally, the total number of transactions has reached approximately 20,000, and the number of transactions for large sizes (152x100cm or larger) has maintained the top position since the start of transactions, and we will continue to focus on providing affordable large-sized wrapping sheets.

(Important) About installation
Since wrapping sheets are DIY products, there is a tendency for individual differences to appear.
It is not something that beginners can apply perfectly from the start.
As the saying goes, "Differences in finish depend on experience," understanding the features and characteristics of the product requires practical experience.
With several experiences (individual differences apply), installation tends to become easier.
This applies to all wrapping sheets.

(Before purchasing...)
We sell small sizes (10x10cm) that allow you to check the quality, so those purchasing larger sizes are advised to confirm quality in advance.



*Product description & product structure


*Product structure
✓Parts that make up the product
Protective film
Transparent film sheet
Pattern sheet
Release sheet
✓Explanation of each part
Protective film... A film that protects the surface of the transparent high-gloss film sheet before installation, preventing fine scratches and such.
Clear sheet / Pattern sheet... These sheets are the main parts of the product, with two sheets laminated together and cannot be separated.
Also, due to the product structure, moisture can enter from the bonded edges, so edge processing (folding back, caulking) is essential.
Release sheet... The sheet to be peeled off when using the adhesive surface of the pattern sheet.
The back of this sheet has a scale printed in 2cm increments, so please use it as a reference for measuring cut sizes.



*Product description
This product is a high-gloss type wrapping sheet.
It has a clear film sheet laminated over the pattern layer of the base, and the surface has a very glossy, high-shine finish.

Since the high-gloss type has a double structure with the clear sheet and pattern sheet laminated, moisture can enter from the cross-section.
When moisture enters, the pattern becomes thinner, so edge processing (folding back, caulking) of the sheet cross-section is mandatory.
Many people comment that moisture entering occurs without this processing.
Edge processing is described in the "Notes on 4D High-Gloss" section, so please refer to that.

*Material/Size/Type of high-gloss
Material: High-molecular PVC (Polyvinyl chloride) Product sizes: 10x10cm / 152x35cm / 210x35cm / 152x50cm / 152x100cm / 152x200cm / 152x300cm Types of high-gloss: 3D high-gloss, 4D high-gloss, 5D


*Product features


Elasticity
When heated with a dryer (heat gun), the sheet becomes soft and pliable at a certain temperature, allowing it to be stretched freely like regular wrapping sheets.
Even if there are some creases, heating with a dryer will allow for smooth application.



Water resistance
Due to the nature of the product, it blocks rain and UV rays, protecting the surface of the vehicle from weather conditions.



Ease of use
Compared to painting, it is inexpensive and easy to change colors and patterns.
Additionally, the back of the sheet has a scale, making it easy to divide and process.



*Notes on high-gloss


Protective film
A protective film is attached to the surface; please peel it off before use.
This protective film is applied to prevent fine scratches.



About cross-section and edge processing
Since the high-gloss sheet has a structure where the clear sheet and pattern sheet are laminated, moisture can enter from the cross-section.
Please fold back about 1-2cm of the edge to wrap the object being adhered to.
Furthermore, if you bond the folded part with a primer and caulk the cross-section, moisture will not enter from the cross-section.

*Even if moisture enters from the cross-section, it will return to the original pattern once dried.

*Edge folding is also necessary for regular wrapping sheets.
If dust or debris enters from the edge, it can cause peeling.



Heat bonding
Since the product consists of two layers—clear sheet and pattern sheet—prolonged heating with a heat gun can melt the inside of the clear sheet and cause it to bond with the pattern sheet.
If it melts inside, it can create a dripped pattern, so be careful with heating time.



*Installation examples


4D high-gloss black


4D high-gloss blue


4D high-gloss red
*