*Regarding the provision
To wrap large sizes such as the hood, a large wrapping sheet is required, but there are few large sizes available on the market, and even when available (including domestic well-known manufacturers), they tend to be expensive.
Compared to painting, we want to offer products that allow you to easily enjoy patterns and colors at a reasonable price, so we have started handling mainly large-sized wrapping sheets.

Typically, OEM and custom-designed products incur high costs due to equipment expenses, labor costs, transportation costs, and intermediate margins to maintain quality, making it difficult to offer cost-effective options.
By contracting directly with factories, we can significantly reduce intermediate margins and shipping costs, making it possible to offer large sizes, which are usually expensive, at a low price.

Our products do not reach the level of wrapping sheets provided by well-known domestic manufacturers, but if you look at the cost performance, especially for large sizes, we believe you will be satisfied with our products.

(Important) About installation
Since wrapping sheets are DIY products, they tend to vary depending on the individual.
It is not something that beginners can apply perfectly from the start.
As the saying goes, "The difference in finish depends on experience," understanding the features and characteristics of the product requires practical experience.
With several experiences (individual differences apply), installation tends to become easier.
This applies to all wrapping sheets.




*Product description & product structure


*Product structure
✓Parts that make up the product
Protective film
Transparent film sheet
Pattern sheet
Release sheet
✓Explanation of each part
Protective film... A film that protects the surface of the transparent high-gloss film sheet before installation, preventing fine scratches and the like.
Clear sheet / Pattern sheet... These sheets are the main parts of the product, with two sheets laminated together and cannot be separated.
Also, due to the product structure, moisture can enter from the laminated edges, so edge processing (folding back, caulking) is essential.
Release sheet... The sheet to peel off when using the adhesive surface of the pattern sheet.
On the back of this sheet, there are 2cm scale markings, so please use them as a reference for measuring cut sizes.



*Product description
This product is a high-gloss type wrapping sheet.
A clear film sheet is laminated over the pattern layer of the base, and the surface has a very glossy, high-shine finish.

Since the high-gloss type has a double structure with the clear sheet laminated onto the pattern sheet, moisture can enter from the cross-section.
When moisture enters, the pattern becomes thinner, so edge processing (folding back, caulking) of the sheet cross-section is required.
Many people comment that moisture entering occurs without this processing.
Edge processing is described in the "4D High-Gloss Precautions," so please refer to that.

*Material/Size/Type of high gloss
Material: High molecular PVC (polyvinyl chloride) Product sizes: 10x10cm / 152x35cm / 210x35cm / 152x50cm / 152x100cm / 152x200cm / 152x300cm Types of high gloss: 3D high gloss, 4D high gloss, 5D


*Product features


Elasticity
When heated with a hairdryer (heat gun), the sheet becomes soft and pliable at a certain temperature, allowing it to be stretched freely like regular wrapping sheets.
Even if slight creases form, heating with a hairdryer will allow for smooth application.



Water resistance
Due to the nature of the product, it blocks rain and UV rays, protecting the surface of the vehicle from weather conditions.



Ease of use
Compared to painting, it is inexpensive and simple to change colors and patterns.
Additionally, the back of the sheet has scale markings, making it easy to divide and process.



*Precautions for high gloss


Protective film
A protective film is attached to the surface; please peel it off before use.
This protective film is applied to prevent fine scratches.



About cross-section and edge processing
Since the high-gloss type has a structure where the clear sheet and pattern sheet are laminated, moisture can enter from the cross-section.
Please fold back about 1-2cm to wrap around the object being adhered to.
Furthermore, if you adhere the folded part with a primer and caulk the cross-section, moisture will not enter from the cross-section.

*Even if moisture enters from the cross-section, it will return to the original pattern once dried.

*Edge processing is also necessary for regular wrapping sheets.
If dust or debris enters from the edge, it can cause peeling.



Adhesion by heat
Since the product consists of two layers—clear sheet and pattern sheet—prolonged heating with a heat gun can melt the inside of the clear sheet, causing it to adhere to the pattern sheet.
If it melts inside, it can create a dripped or streaked pattern, so be careful with heating time.

＜Before purchase＞ Because our 4D sheets are thicker, applying and processing on curved surfaces requires skill.
For those unsure, we strongly recommend purchasing a 10cm small size to check quality.
After purchase, some comments have been received that the thickness makes processing difficult.
(2) This product has a thin protective film attached to prevent scratches during work.
Please peel it off before use.
Also, since it is shipped in a roll, bubbles may form between the protective film and the main body, making it look like wrinkles, but please understand that this is to protect the product itself.

Material: High-quality polymer film Sheet type: 4D (high-gloss finish) A glossy carbon sheet with a clear film on top, resembling a high-gloss carbon sheet.
Lightweight carbon fiber sheet with excellent heat resistance, durability, elasticity, and breathability.
Even if creases form, heating with a heat gun or hairdryer while applying allows smooth application on curved surfaces.
The back of the carbon sheet has scale markings, making it easy to divide, and it can be used for both interior and exterior car wrapping.


＜Usage precautions＞ Due to the nature of the product, peeling, hardening, or discoloration may occur over time.
Additionally, after installation, deterioration over time can make it difficult to peel off.
In such cases, adhesive residue or peeling during re-painting may occur.
Durability varies greatly depending on usage environment and vehicle conditions, and we do not provide any guarantees regarding these symptoms.
We sell trial sizes (10x10cm), so please purchase after confirming quality.

*Regarding waterproofing... Some customers have pointed out that moisture seeps into the film after application.
Since the clear layer and the 4D wrapping sheet are made of different materials laminated together, the waterproofness at the joints is weaker than the surface.
To prevent water ingress, cover the object with the carbon sheet so that the joints do not contact liquids.
If concerned, please use caulking material or similar.

2024/04/05 22:50:30#cc918f7513ab5bdd1a858548f62ee02214ac5ff8