【Product Description】
● For covering dirt on tiles and rubber gaskets in bathrooms, toilets, washbasins, kitchens, etc. (Cannot be used on silicone parts)
● Can hide stains and mold that cannot be completely removed with mold remover just by applying. (Both wall surfaces and floor surfaces are OK)
● On surfaces that are smooth and glossy, excess parts can be removed with the included wiping eraser. (Within 1-2 hours after application)
● Contains antibacterial and mold-proof agents, helping to prevent mold growth and dirt.
● Oil-based type that dries quickly and allows for multiple coats. (After more than 1 hour of application)
● Alcohol-based with little unpleasant odor, leaving no smell after completion.
● Uses a hard, fine pen tip that wears less and allows for pinpoint application.
● Can be used for approximately 200 meters with one bottle (single coat). (Varies depending on the condition of the surface, application strength, and amount applied)
● After drying, it is resistant to water. (After more than 1 hour of application)
● Once applied, it becomes difficult to remove and less likely to get dirty, making maintenance easier. 【Product Uses】
● Pen for covering dirt on tiles and rubber gaskets【Caution】
● After use, wipe the pen tip with tissue before capping for storage.
● Cannot be used on silicone parts.
● Be careful that surfaces that are rough, uneven, or absorb paint cannot be covered.
● Wipe off immediately with a damp cloth before it dries.
● Do not allow water to contact the surface for 1 hour after application.
● Excessive pressing of the pen tip may cause the paint to leak.
● The effects of mold prevention and antibacterial action vary depending on the situation.
● After application, scrubbing with detergent or mold remover may cause the coating to peel off depending on the circumstances.
● When using for a long time, work while ventilating.
● To fill chips in tiles, use the separately sold "Meji Stick"; to cover cracks in tiles, use the separately sold "Meji Crack Filler".
● Cannot repair broken or cracked tiles.
● After use, cap tightly and store upright.
● Do not place where children can reach.
● Do not leave in places with high temperatures (e.g., hot cars).
● Flammable. Do not use near open flames or heat sources. 【Specifications】
● Application amount: approximately 200m (width about 3mm) per coat (varies depending on the surface condition, application strength, and amount applied)【Content】
● 9g【Material】
● Synthetic resin, alcohol-based solvent, pigment, mold-proof agent, antibacterial agent, additive【Included Items】
● Wiping eraser, paint marker, pen type