Usually ships within 1-5 business days. [New, Unopened Item] The 6.4-foot model series of the "Horizon MJ (Multi-Jigging)" multi-use rod that supports "high pitch & slow"!

A jigging rod that allows you to freely control a wide range of speeds from high pitch to slow, and enjoy technical games.
You can experience the fun of "setting the hook" against a wide range of targets, from blue fish to bottom fish, by using combined jerks with varying speeds.

The "6 feet 4 inches (2-piece) length setting" aims to allow for more diverse jerks by increasing the overall length.
When you want to jerk with a focus on the fall, the longer the rod, the better it is at lifting it high utilizing the stroke, then allowing for a longer fall (lure).
Also, when the line angle is diagonal, such as when drifting, a slightly longer rod is better for jerking diagonally upwards, and conversely, it becomes possible to operate the lure without the line rubbing against the boat even in head currents where the line dives below the boat.
It excels at "slow jerks" by utilizing its length, and it is also a rod that can handle high pitches.
You could say that the options have expanded depending on the target fish, the way you want to lure, and the sensitivity you desire.
The butt section is composited with C.N.T. to enhance its tenacity.
The mounted guides use stainless steel frames, SiC-S rings, and K guides. The guide diameter has been increased, making it possible to use main line PE #2 to #3 as a standard.
6.4-foot series (grip joint, 2-piece rod)
〇 [HMJ642B-LL]... "Inshore Super Light Model". Primarily for slow jerks, easy to handle with 80-120g jigs, supports up to 100g for high pitch jerks, and is suitable for depths up to about 80m, mainly in shallow waters.
〇 [HMJ642B-L]... "Inshore Light Model". Primarily for slow jerks, easy to handle with 100-150g jigs, supports up to 120g for high pitch jerks. Can be used for slow jerks up to 250g in medium-deep waters.
〇 [HMJ642B-ML]... "Inshore Technical Model". Primarily for slow jerks, easy to handle with 120-180g jigs, supports up to 150g for high pitch jerks. Can be used for slow jerks up to 300g in medium-deep waters.
〇 [HMJ642B-M]... "Inshore All-Round Model". Primarily for slow jerks, easy to handle with 150-200g jigs, supports up to 180g for high pitch jerks. Can be used for slow jerks up to 350g in medium-deep waters.
〇 [HMJ642B-MH]... "Inshore/Deep Water Model". Primarily for slow jerks, easy to handle with 180-250g jigs, supports up to 200g for high pitch jerks. Can be used for slow jerks up to 400g in medium-deep waters.
〇 [HMJ642B-H]... "Strong Current/Deep Water Model". Primarily for slow jerks, easy to handle with 180-300g jigs, supports up to 250g for high pitch jerks. Can be used for slow jerks up to 450g in medium-deep waters.

〇 Tips and Precautions for Handling 〇
*When fighting a target, it is easier to forcibly pull the target away from the bottom by lowering the rod and fighting only by reeling in.
*Set the drag MAX value correctly, and be careful not to raise the rod too much during the fight; an angle parallel to the water surface is recommended.
Overall Length: 6.4 feet (1.93m) / Number of Sections: 2 (Grip Joint) / Closed Length: 148cm / Rear Grip: 405mm / Weight: 121g
Type: Compatible with bait reels (Reference reel size: Daiwa 15, Shimano 1000-1500) / Recommended tackle setting (Line PE within #2.5, Leader within #18, Drag within 4kg)
Power: M / Action: Regular / Mounted Guides: Stainless steel frame, SiC-S ring, K guide
Compatible Lure Size: High Pitch Type (100-180g), Slow Jerk Type (150-350g) / Compatible PE Line: MAX #2.5
Model [HMJ642B-M (Inshore All-Round Model)]... Primarily for slow jerks, easy to handle with 150-200g jigs, supports up to 180g for high pitch jerks. A 2-piece multi-jigging rod that can be used for slow jerks up to 350g in medium-deep waters.