Ships within 3 business days ≪Brand new unopened item≫

Gear ratio and bearing sizes do not change between left and right. (Bearing shape and images are subject to change without notice.) Oil-less use and oil-in use may affect bearing noise and casting distance depending on viscosity. ◎Notes Bearings may vary slightly between individual units (Individual differences may be noticeable in bearings alone, but there is no problem once installed on the reel.) Also, transferring purchased bearings to a different model reel will change rotation and bearing noise. Bearing descriptions ◎Stainless bearing with shield and grease, ABEC11 specification, smooth bearing ◎HX ceramic bearing open (oil-less at sale) Ideal for beginners in ceramic bearings, maintenance is easier due to open type (ABEC11 specification) ◎GX ceramic bearing shield type (some open type) (oil-less at sale) Rare among ceramic bearings, this is a shield type bearing. Since it is shielded, it is less likely for dirt and foreign objects to enter. (ABEC11 specification) ◎Zirconia ceramic bearing (no oil at sale) Absolutely necessary for saltwater use, the biggest advantage is that it does not rust. Outer ring ceramic, inner ring ceramic, pole ceramic, using special materials for the cage to minimize bearing noise ◎Type S ceramic bearing (no oil at sale) HX-TYPES Type S features a cage that makes it oil-less, and both oil-in and oil-less operation are smooth and low noise (ABEC11 specification) ◎Ceramic bearing HXR (oil-less at sale) With a special cage, it excels in durability, casting distance, high rotation, and low noise. Of course, it can be used with or without oil (ABEC11 specification) ◎Ceramic bearing LX (oil-less at sale) Compared to ceramic bearing HXR, it maintains durability, casting distance, and high rotation, with a cage shape changed to Type S, and achieves ultra-low noise (ABEC11 specification) ◎Twin bearing (double ball bearing) is made by utilizing the characteristics of various bearings, resulting in improved initial speed. It allows for even lighter lure casting than standard bearings. Installation: Normally, bearing thickness is 4mm, but twin bearings are 3mm thick, so a ring increases the thickness by 1mm. The installation is simple. When attaching to the casting cup side and cast control, insert a large O-ring between the reel body and the bearing. For models with a spool bearing, use a small O-ring. Normally, bearing thickness is 4mm, but twin bearings are 3mm thick, so an O-ring increases the thickness by 1mm. To install, insert an O-ring onto the spool shaft with the ball side facing outward. ◎You can check bearing comparisons on the bearing chart. (Not measured, just an illustrative diagram.) ●When using in saltwater, we recommend using oil to prevent rust and other issues.
ABU Garcia ABU 1500C IAR spool ceramic bearing HXR 2 pieces (11-5-4 & 11-5-4) 1. Bearing size: outer diameter 11mm, inner diameter 5mm, thickness 4mm 2. Bearing size: outer diameter 11mm, inner diameter 5mm, thickness 4mm Can be used in various ways, including oil-less and oil-in.