Code:4549550178389

Brand:ELECOM

Model: WTC-C1167GC-W

Product color: White

Product weight: 270g

About this product
This is a repeater that relays Wi-Fi signals from the Wi-Fi router to expand the Wi-Fi area. It reliably delivers Wi-Fi signals to rooms where internet connection was difficult, making it suitable for telework and online learning.
It is suitable for homes with rooms far from the Wi-Fi router, or homes with reinforced concrete structures, insulation materials, floor heating, etc., where Wi-Fi signals have difficulty passing through, and customers who are troubled by 'Wi-Fi signals not reaching or hard to reach.'
This product can extend the Wi-Fi area not only for standard Wi-Fi routers using fixed lines but also for 5G home routers equipped with Wi-Fi from various carriers.
Communication with a detached house not connected to the main building was treated as 'outdoor use,' which could violate radio law when using conventional products that also use radio waves prohibited for outdoor use. This product is the industry's first to feature a 'detached house mode (patented)' that operates only in radio bands approved for outdoor use, allowing safe use even in such environments.
Connection to the Wi-Fi router (main unit) is simply done by pressing the WPS button on the main unit and this product. If the device supports WPS, it can connect to other manufacturers' products as well. For products without WPS, connection can be set up via the management screen of this product.
› See more brands ELECOM
Wireless communication standard: 802.11ac
Data transfer rate: 1167 Mbps
Frequency band class: Dual band
Color: White About this product
This is a repeater that relays Wi-Fi signals from the Wi-Fi router to expand the Wi-Fi area. It reliably delivers Wi-Fi signals to rooms where internet connection was difficult, making it suitable for telework and online learning.
It is suitable for homes with rooms far from the Wi-Fi router, or homes with reinforced concrete structures, insulation materials, floor heating, etc., where Wi-Fi signals have difficulty passing through, and customers who are troubled by 'Wi-Fi signals not reaching or hard to reach.'
This product can extend the Wi-Fi area not only for standard Wi-Fi routers using fixed lines but also for 5G home routers equipped with Wi-Fi from various carriers.
Communication with a detached house not connected to the main building was treated as 'outdoor use,' which could violate radio law when using conventional products that also use radio waves prohibited for outdoor use. This product is the industry's first to feature a 'detached house mode (patented)' that operates only in radio bands approved for outdoor use, allowing safe use even in such environments.
Connection to the Wi-Fi router (main unit) is simply done by pressing the WPS button on the main unit and this product. If the device supports WPS, it can connect to other manufacturers' products as well. For products without WPS, connection can be set up via the management screen of this product.
› See more

Shipping size: Height 21.8cm, Width 12.9cm, Depth 7.1cm

Shipping weight: 290g

Specifications
Supported OS (Windows): Windows 10 (64/32bit)
Supported OS (Mac): macOS Catalina 10.15 / macOS Mojave 10.14 / macOS High Sierra 10.13 / macOS Sierra 10.12 / OS X El Capitan 10.11 / OS X Yosemite 10.10
Supported OS (iOS): iOS 10.0 to 14.0
Supported OS (Android): Android 4.4 to 10.0
Setup tool supported browsers: Internet Explorer 11, Edge, Chrome for Android, Safari for Mac OS, Safari for iOS, Safari for iPadOS. Initial setup (internet connection setting) is only supported using the built-in web browser.
Supported devices (wireless LAN): iPhone series, iPad series, Android devices, various game consoles (3DS/DS series, PSP series, PS Vita series, PS3/4, Wii/Wii U, Nintendo Switch, Xbox 360), various wireless LAN-enabled devices.
Wired standards: IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) compliant
Wired connectors: LAN: RJ-45 8-pin 1 port, all ports support Auto MDI/MDI-X, Auto-Negotiation
Wired transmission speed: 1000Mbps / 100Mbps / 10Mbps
Wireless standards: IEEE 802.11ac / IEEE802.11n / IEEE 802.11a / IEEE 802.11b / IEEE 802.11g compliant
Wireless transmission methods: IEEE802.11ac: MIMO-OFDM / IEEE802.11n: MIMO-OFDM / IEEE802.11g: OFDM / IEEE802.11b: DS-SS / IEEE802.11a: OFDM
Wireless transmission speed (theoretical): IEEE802.11ac: up to 867Mbps / IEEE802.11n: up to 300Mbps / IEEE802.11g: up to 54Mbps / IEEE802.11b: up to 11Mbps / IEEE802.11a: up to 54Mbps
Frequency bands: 2.4GHz band: 2,400–2,484MHz, 5.2GHz band (W52): 5,150–5,250MHz, 5.3GHz band (W53): 5,250–5,350MHz, 5.6GHz band (W56): 5,470–5,725MHz
Channels: 2.4GHz band: 1–13ch, 5GHz bands (W52/W53/W56): 36/40/44/48/52/56/60/64/100/104/108/112/116/120/124/128/132/136/140/144ch
Wireless security: WPA2 Personal (AES), WPA Personal (TKIP)
Beamforming function: Beamforming Z compatible
MU-MIMO function: Supported
Setup method: WPS 2.0 compatible
Access method: Infrastructure
Antenna (number): Built-in antennas: 2 (shared for 2.4GHz/5GHz)
Supported protocol: TCP/IP (IPv4)
Automatic firmware update: Supported
Input voltage: AC 100–240V 10%, 0.3A, 50/60Hz
Maximum power consumption: 6.0W
Power connector: AC plug
External dimensions (width x depth x height): approximately 62.0mm x 43.0mm x 91.0mm (excluding protrusions)
Weight: approximately 125g
Housing material (color): Plastic (White)

Description
This is a repeater that relays Wi-Fi signals from the Wi-Fi router to expand the Wi-Fi area. It reliably delivers Wi-Fi signals to rooms where internet connection was difficult, making it ideal for telework and online learning.
It is suitable for homes with rooms far from the Wi-Fi router, or homes with reinforced concrete structures, insulation materials, floor heating, etc., where Wi-Fi signals have difficulty passing through, and customers who are troubled by 'Wi-Fi signals not reaching or hard to reach.'
This product can extend the Wi-Fi area not only for standard Wi-Fi routers using fixed lines but also for 5G home routers equipped with Wi-Fi from various carriers.
Communication with a detached house not connected to the main building was treated as 'outdoor use,' which could violate radio law when using conventional products that also use radio waves prohibited for outdoor use. This product is the industry's first to feature a 'detached house mode (patented)' that operates only in radio bands approved for outdoor use, allowing safe use even in such environments.
Connection to the Wi-Fi router (main unit) is simply done by pressing the WPS button on the main unit and this product. If the device supports WPS, it can connect to other manufacturers' products as well. For products without WPS, connection can be set up via the management screen of this product.
This product's indicator lights show the Wi-Fi connection status with the main router, allowing easy identification of the optimal placement without the need for a dedicated app.
In actual measurements using this product, it has improved communication speeds by approximately 4 times in a wooden 3-story house, about 5 times in a reinforced concrete 2LDK apartment, with measurements taken at the furthest points from the router and intermediate points.
Repeaters relay signals to areas where the router's signal cannot reach, bringing the connection speed closer to the original speed of the line or router. Please note that it cannot exceed the speed of the line or router itself.
Stylish design that plugs directly into a wall outlet. No cables are needed for connection, making it easy to install at intermediate points inside the house. Its compact design does not block the upper outlet of a standard double socket when plugged in.
Supports high-speed communication with less interference and stable connection on the 5GHz band (11ac/n/a) at 867Mbps, and the 2.4GHz band (11n/g/b) at 300Mbps, which is resistant to obstacles like walls and floors.
Equipped with high-power built-in antennas utilizing know-how from the group company DX Antenna, providing a neat appearance while ensuring comfortable communication. The antennas are designed with attention to placement and orientation to achieve omnidirectional sensitivity, enabling reliable connection even with smart home appliances (Wi-Fi air conditioners) and IoT devices, without missing signals.
Includes a LAN port supporting 1Gbps, allowing wired devices such as TVs and recorders to connect via Wi-Fi, and can also be used as an Ethernet converter.
Features band steering to automatically select and connect to the more optimal band (5GHz/2.4GHz).
Uses 'Beamforming Z' to focus signals, enabling comfortable connection even from distant locations on compatible devices like iPhone and Android.
Supports MU-MIMO function, allowing simultaneous data transmission to multiple devices if they are MU-MIMO compatible, with a maximum of 2 devices processed at the same time.
Products that meet one or more of our internal environment certification standards and display the 'THINK ECOLOGY' mark.
Committed to environmental conservation, with packaging made solely of paper, cardboard, and plastic bags.

Inquiries about the product
ELECOM General Information Center