Code: 4549550344197

Brand: Elecom (ELECOM)

Model: T-IS01M-2310WH

Product color: White

Size information: 1m

Product size: Height 0.1, Width 3.2, Depth 16.8

Product weight: 290

About this product
Each outlet has an individual switch that allows you to turn the power ON/OFF for each socket. Even when connected devices are turned OFF, it reduces standby power consumption, helping to save electricity costs.
The individual switches are equipped with orange neon bulbs. When the switch is ON, it lights up orange, allowing you to check the status even from a distance.
The spacing between outlets is 57mm for the wide spacing and 35mm for the narrow spacing. The outlets are arranged with wide spacing to prevent interference when inserting large adapters into neighboring sockets.
The power switch is arranged diagonally, making it less likely to interfere when inserting large AC adapters, and it is easy to press to turn the power ON/OFF.
The bottom of the tap is equipped with a strong neodymium magnet that adheres firmly, making it difficult for heavy AC adapters or similar to slip off even when inserted into the outlets.
› See more brands Elecom (ELECOM)
Color: White
Total number of power outlets: 3
Voltage: 125 volts
Product dimensions: 16.8cm length x 3.2cm width; about 50mm depth; excluding cord and plug parts
Each outlet has an individual switch that allows you to turn the power ON/OFF for each socket. Even when connected devices are turned OFF, it reduces standby power consumption, helping to save electricity costs.
The individual switches are equipped with orange neon bulbs. When the switch is ON, it lights up orange, allowing you to check the status even from a distance.
The spacing between outlets is 57mm for the wide spacing and 35mm for the narrow spacing. The outlets are arranged with wide spacing to prevent interference when inserting large adapters into neighboring sockets.
The power switch is arranged diagonally, making it less likely to interfere when inserting large AC adapters, and it is easy to press to turn the power ON/OFF.
The bottom of the tap is equipped with a strong neodymium magnet that adheres firmly, making it difficult for heavy AC adapters or similar to slip off even when inserted into the outlets.
› See more

Shipping size: Height 25cm, Width 7cm, Depth 6.3cm

Shipping weight: 345g

Specifications
Outlet specifications: 2-pin (polarized 2-pin plugs can also be connected)
Number of outlets: 3
Outlet spacing: 57mm, 35mm
Plug specifications: 2-pin
AC cord length: 1m
Rated voltage: 125V, 15A, up to 1500W
Polarity support: (outlets support, plugs are marked only)
Switch: (individual switches)
Lightning guard:
Dust shutter:
Retaining function:
Outlet caps:
Power indicator lamp: (individual switches)
Double structure:
Double coating:
Insulation cap plug:
Swing plug:
Magnet:
Hanging hole:
Breaker:
Noise filter:
Modular jack:
Interlocking function:
Conversion adapter:
Color: White
Material: ABS resin, PVC resin, urea resin, brass, copper
External dimensions: Width approximately 168mm, Depth approximately 50mm, Height approximately 32mm (excluding cord and plug parts)
Weight: approximately 290g
Accessories: Instruction manual
Usable region: Japan only
Regulations: PSE (Specified Electrical Appliances)
Warranty period: 1 year

Description
Each outlet has an individual switch that allows you to turn the power ON/OFF for each socket. Even when connected devices are turned OFF, it reduces standby power consumption, helping to save electricity costs.
The individual switches are equipped with orange neon bulbs. When the switch is ON, it lights up orange, allowing you to check the status even from a distance.
The spacing between outlets is 57mm for the wide spacing and 35mm for the narrow spacing. The outlets are arranged with wide spacing to prevent interference when inserting large adapters into neighboring sockets.
The power switch is arranged diagonally, making it less likely to interfere when inserting large AC adapters, and it is easy to press to turn the power ON/OFF.
The bottom of the tap is equipped with a strong neodymium magnet that adheres firmly, making it difficult for heavy AC adapters or similar to slip off even when inserted into the outlets.
The outlets can also connect with overseas smart plugs and other 2-pin plugs with polarity differences in blade width.
There is no polarity difference in the power plug blades.
If you need to match polarity with connected devices, insert the plug so that the longer hole of the outlet and the 'E' mark (the side with only 'ELECOM' written) on the plug's ELECOM logo face each other.
Equipped with a varistor that has a surge current capacity of 3500A/1 time, 2500A/10 times, and a maximum limiting voltage of 935V (500A 8/20μs), it absorbs lightning surges caused by induced lightning to protect connected devices. In cases of direct lightning strikes or induced lightning with surges exceeding the varistor's capacity, connected devices may not be protected. Performance may degrade depending on the voltage and number of surges received.
The outer shell is made of high flame-retardant ABS resin, and the inner shell uses heat-hardened resin (urea resin) in a double structure. It is resistant to melting in case of heat generation, helping prevent electrical fires.
Equipped with a dust prevention shutter to prevent dust from entering the outlets when not in use.
Adopts a 180-degree swing plug for easy wiring even in tight spaces.
The power cord uses a double-insulated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010), which helps prevent electric shock and fire caused by wire breakage or damage.
The cord is a flat, parallel 2-core wire, making it flexible and easy to handle.
The plug incorporates heat-hardened resin between the blades to prevent tracking phenomena that cause fires, and features an insulated sleeve to reduce the risk of electric shock.
The blade receiving metal inside the outlet uses a thickness of 0.8mm, which is resistant to deformation. This maintains the plug's retention force even after repeated insertions and removals, and suppresses heat generation in the outlet.
This product meets at least one of our internal environmental standards and displays the 'THINK ECOLOGY' mark.
It is environmentally conscious, with packaging that reduces plastic weight by over 20% compared to our standard products.
It is environmentally conscious, with packaging made solely of paper, cardboard, and plastic bags.

Product inquiries
Elecom product support
Please check 8056.jp. Brand introduction


AC charger

Visit store


Tap

Visit store


Mobile battery

Visit store


Mouse

Visit store


Keyboard

Visit store



Elecom Co., Ltd. aims to enrich and make your lifestyle more comfortable through peripheral devices for smartphones, tablets, and PCs. Manufacturer's description
A 3-outlet tap that can be attached to desks or steel furniture with strong magnets, making it easy to use in various scenes such as offices or homes.

Each outlet has an individual switch that allows you to turn the power ON/OFF for each socket. Even when connected devices are turned OFF, it reduces standby power consumption, helping to save electricity costs.

Features

Equipped with a dust prevention shutter to prevent dust from entering the outlets when not in use.

The spacing between outlets is 57mm for the wide spacing and 35mm for the narrow spacing. The outlets are arranged with wide spacing to prevent interference when inserting large adapters into neighboring sockets.

Adopts a 180-degree swing plug for easy wiring even in tight spaces.

The plug incorporates heat-hardened resin between the blades to prevent tracking phenomena that cause fires, and features an insulated sleeve to reduce the risk of electric shock.

The blade receiving metal inside the outlet uses a thickness of 0.8mm, which is resistant to deformation. This maintains the plug's retention force even after repeated insertions and removals, and suppresses heat generation in the outlet.

The power cord uses a double-insulated cord compliant with the Japan Wiring System Industry Association standard (JWDS0010), which helps prevent electric shock and fire caused by wire breakage or damage.